MULIFLEX
  
Back  
PERI™ MULTIFLEX
  

Is the girderbased slab form work system for any shape and any floor height.

GT24 girder
Allows large spans and thus reduces the number of components required. The high load-bearing capacity increases the cost effectiveness.

 
 

GT 24
Permissible shear force on struts QD = 14.0 kN
Permissible shear force on ties QD = 13.0 kN
Permissible bending moment M = 7.0 kN
Moment of inertia ly = 8000 cm4
When using the 24 clawhead the reaction force of 28 kN can also be taken between the girder nodes.
 


PERI Safety handrail holder is
simply screwed tight
 
The VT 20K girder can be used for smaller slab thicknesses.
The high density web board with high synthetic resin content makes the girder strong and rigit on use.
The 40 x 80 mm cross section of the chords of both girders prevents them tilting, and is strong enough to withstand nailing.

VT 20K
perm. Qz = 11.0 kN
Max. A = 22 kN
perm. M = 5.0 kN
ly = 4290 cm4