Slab Form work

DECKING

Specifications:

• Are manufactured with emphasis on squareness.
• Corners of the panel face are drilled for nailing to the support bearers.
• Deck panels can be used on Coffer and Trough slabs.
  
  Available in: 2,0 mm pressed or 2,5 mm coined-edge.

  

DECKING FILLERS

Pressed Metal 2mm Plate			Coined Deck Panel 2,5mm
SIZE mm	MASS kg		SIZE mm	MASS kg
*1219 x 457	13,80		*1219 x 457	18,34
1219 x 381	12,10		1219 x 381	16,28
1219 x 305	9,09		1219 x 305	10,25
1219 x 229	6,81		1219 x 229	8,24
1219 x 152	4,80		1219 x 152	6,22

*914 x 610	13,33		*914 x 610	17,31
914 x 534	11,39		914 x 534	15,71
914 x 457	10,00		914 x 457	14,14
914 x 381	8,90		914 x 381	12,48
914 x 305	6,36		914 x 305	7,84
914 x 229	5,90		914 x 229	6,29
914 x 152	3,86		914 x 152	4,74

*825 x 450	9,71		825 x 450	12,30
825 x 900	18,08		825 x 600	16,40
825 x 300	5,74		825 x 300	7,20
825 x 150	3,54		825 x 150	4,30
825 x 100	2,80		825 x 100	3,41

* Standard sizes
OTHER SIZES AVAILABLE ON REQUEST

Note:
Loadings are based on 2 mm Faceplate with 2 mm Folded Channel Stiffener.
Recommended maximum deflections are span /360.
Live load of 2,5 KN/m2 is included.